Products
Specifications
Brochures
Description
| Tilt y |
±2° |
| Rotation z |
±2,5° |
| Resolution in full step in 1/8 step |
1,25 μm 0,156 μm |
| Lead screw pitch |
0,25 mm |
| Repeatability |
1 μm |
| Maximum load capacity |
15 kg |
| Type of actuator | 970-0065 |
| Cable | 1,2 m length cable included |
| Motor connector |
DB15(M) (wiring diagram) |
| Optocoupler end limit switches | 2 per actuator |
| Switch polarity | pushed is open |
| 970-0090 Motorized Rotation and Tilt Stage
209.96 kB |
- Motorized Actuators 970-0065 installed
- Manual version of Multi-Axis Stages 850-0010 and vacuum version are available
Multi-Axis Tilt Platform 850-0010 provides angular adjustment about two-axis - tilting and in-plane rotation. The mounting platform is rotated around kinematic pivot point by two micrometers.
The out-of-plane tilting range is ±2° and the in-plane rotation range is ±2.5°. Two micrometers screws are located side by side for a handy use. The adjustment movements are not calibrated, and they are uncoupled. The mounting platform has a 25 mm grid of tapped holes M6 and M4.
Related products
Products
Information
Eksma Optics
Contacts
- Address: Dvarcioniu st. 2B LT-10233 Vilnius, Lithuania
- Phone: (+370) 5 272 99 00
- Fax: (+370) 5 272 92 99
- E-mail: [email protected]
© 2025 EKSMA Optics, UAB. All rights reserved.
