High Repetition Rate Pockels Cell Driver

MAX. HV OPERATING VOLTAGE

MAX. HV REPETITION RATE

Remove all filters

Code	MAX. HV OPERATING VOLTAGE	MAX. HV REPETITION RATE	Price	Delivery	Add to cart
2DP-1000-2.4-Al	2.4 kV	1 MHz	Request	Request
2DP-2000-1.6-Al	1.6 kV	2 MHz	Request	Request
DPB3-2000-3.4-Al	3.4 kV	2 MHz	Request	Request
DPB3-2500-3.1-Al	3.1 kV	2.5 MHz	Request	Request
DPB3-3000-2.6-Al	2.6 kv	3 MHz	Request	Request
2DPB3-4000-1.7-Al	1.7 kV	4 MHz	Request	Request
2DPB3-6000-1.3-Al	1.3 kV	6 MHz	Request	Request
2DPB2-300-3.4	3.4 kV	300 kHz	Request	Request
2DPB2-500-3.4-Al	3.4 kV	500 kHz	Request	Request
2DPB2-1000-2.5-Al	2.5 kV	1 MHz	Request	Request
2DPB2-2000-1.8-Al	1.8 kV	2 MHz	Request	Request
2DPB2-2000-1.5-Al	1.5 kV	2 MHz	Request	Request

	2DP-1000-2.4-Al	2DP-2000-1.6-Al	DPB3-2500-3.1-Al	DPB3-3000-2.6-Al
Maximal HV operating voltage	2.4 kV	1.6 kV	3.1 kV	2.6 kV
Maximal HV repetition rate	1 MHz	2 MHz	2.5 MHz	3 MHz
Pulse duration	0 - 5000 ns		100 - 5000 ns
HV pulse rise time, typical	<6.5 ns	<6 ns	<10 ns	<8.5 ns
HV pulse fall time, typical	<6.5 ns	<6 ns	<10 ns	<8.5 ns
Output polarity	Positive		Bipolar
HV power consumption	<180 W	<130 W	<360 W	<325 W
24 V power consumption	<14 W	<18 W	<10 W	<10 W
Cooling	Water

	2DPB3-4000-1.7-Al	2DPB3-6000-1.3-Al
Maximal HV operating voltage	1.7 kV	1.3 kV
Maximal HV repetition rate	4 MHz	6 MHz
Pulse duration	0 - 5000 ns
HV pulse rise time, typical	<10.5 ns	<9 ns
HV pulse fall time, typical	<10.5 ns	<9 ns
Output polarity	Positive
HV power consumption	<360 W	<350 W
24 V power consumption	<6 W	<10 W
Cooling	Water

Driver needs to be mounted on heatsink unless it is cooled by water. Driver's base plate temperature needs to be lower than 35 °C in all regimes of operation. Power consumption for 6 pF load.

Voltage or repetition rate derating is necessary if capacitance of your Pockels cell is higher. Contact vendor for details.

EKSMA Optics High Repetition Rate Pockels Cell Driver 143.49 kB	PDF
EKSMA Optics HV Driver 2DP-500, 1000 & 2000 Manual 1.06 MB	PDF
EKSMA Optics HV Driver 2DPB3 4000 & 6000 Manual 1.23 MB	PDF
EKSMA Optics HV Driver DPB3 500, 2000, 2500 & 3000 Manual 1.27 MB	PDF

2DP/DPB3 series Pockels cell drivers can operate with highest possible repetition rates among all the Pockels cells drivers offered by EKSMA Optics. These drivers can be used for a single pulse selection in the pulse picker applications for high repetition rate lasers.

Features:

HV pulse amplitude up to 3.1 kV
Repetition rate up to 6 MHz
HV pulse duration down to <1 ns
HV pulse duration extension using pulse regeneration technique

Pockels Cell Drivers For Up to 6 MHz Repetition Rate (≤6 MHz, ≤3.1 kV)

Pockels Cell Drivers For Up to 6 MHz Repetition Rate (≤6 MHz, ≤3.1 kV)

Pockels Cell Drivers For Up to 6 MHz Repetition Rate (≤6 MHz, ≤3.1 kV)

Pockels Cell Drivers For Up to 6 MHz Repetition Rate (≤6 MHz, ≤3.1 kV)

ARE YOU SURE YOU WANT TO REMOVE THIS ITEM?

AR TIKRAI NORITE IŠTRINTI ADRESĄ?