DP-50-3.6 DP-50-3.6-AI |
DP-250-2.5 DP-250-2.5-Al |
DP-250-3.6 DP-250-3.6-Al |
DP-400-1.5 DP-400-1.5-AI |
|
Maximal HV operating voltage | 3.6 kV | 2.5 kV | 3.6 kV | 1.5 kV |
Maximal HV repetition rate | 60 kHz | 250 kHz | 250 kHz | 400 kHz |
Pulse duration | 100 - 5000 ns | |||
HV pulse rise time, typical | <7 ns | <6 ns | <7 ns | <5.5 ns |
HV pulse fall time, typical | <7 ns | <6 ns | <7 ns | <5.5 ns |
Output polarity | Positive | |||
HV power consumption | <20 W | <40 W | <75 W | <20 W |
12V / 24V power consumption | <1 W | <4.5 W | <4 W | <5.5 W |
Cooling | Water |
DP-500-2.6 DP-500-2.6-Al |
DP-1000-1.8 DP-1000-1.8-Al |
DP-2000-1.5 DP-2000-1.5-Al |
|
Maximal HV operating voltage | 2.6 kV | 1.8 kV | 1.5 kV |
Maximal HV repetition rate | 500 kHz | 1 MHz | 2 MHz |
Pulse duration | 100 - 5000 ns | ||
HV pulse rise time, typical | <6.5 ns | <6 ns | <7 ns |
HV pulse fall time, typical | <6.5 ns | <7 ns | <7 ns |
Output polarity | Positive | ||
HV power consumption | <90 W | <80 W | <120 W |
12V / 24V power consumption | <6 W | <9 W | <12 W |
Cooling | Water |
Driver needs to be mounted on heatsink unless it is cooled by water. Driver's base plate temperature needs to be lower than 35 °C in all regimes of operation. Power consumption for 6 pF load.
Voltage or repetition rate derating is necessary if capacitance of your Pockels cell is higher. Contact vendor for details.
Features:
DP series units are available in two versions: "open frame" which is ideal for OEM manufacturers incorporating drivers in their own systems and encased in aluminum housings. Encasing of Pockels cell driver in aluminum housing solves two problems: shields both humans and electronics from high voltage impact from operating Pockels cell driver, and protects driver itself from potentially harmful external contact - ensuring safe operation and driver longevity. The housed option is especially handy for researchers and custom product manufacturers who use these drivers during their own systems build-up.