Products
Specifications
Brochures
Description
| Model | 960-0130-01 | 960-0130-02 | 960-0130V |
| Rotation range | 360° continuous | ||
| Resolution in full step* in 1/8 step* |
54 arcsec
6.75 arcsec |
||
| Repeatability (bidirectional) | 72 arcsec | ||
| Backlash | 40 arcsec. max. | ||
| Maximum speed* | 10 turn/min | 6 turn/min | 4 turn/min |
| Wobble | 40 μRa | ||
| Cable | 1.6 m length | 2 m length | |
| Motor Connector | DB9(M) (wiring diagram) | HDB15(M) (wiring diagram) | |
| Stepper motor | 4247 | 5918 | VSS43* * |
| Load capacity horizontal vertical |
60 kg 25 kg |
40 kg 20 kg |
|
| Weight | 6.6 kg | 5.7 kg | |
| Reference Hall switch | 1, pushed is "closed" | ||
* Test conditions: 980-0030 controllers; power supply - 36 V
* * Specifications of stepper motor VSS43: wiring scheme – bipolar; design voltage – 42 V; phase current – 1.2 A; holding torque – 0.235 Nm; detent torque – 7 mNm; phase resistance – 2.6 Ohm; inductance – 5.2 mH; steps/revolution – 200 (1.8°).
| 960-0130 Large Motorized Rotation Stages
295.69 kB |
- Hardened steel with aluminium body
- Large diameter ball bearings
- Worm Gear Ratio is 1:120
- Hall-effect reference limit switch
- Stepper motor or DC motor with encoder
- Motor can be optionally equipped with reduction gear
- 1.8 m long cable included
- Very high load capacity
- Vacuum version 960-0130V available on request
- Encoders or Revolution sensors are available on request. More information
Related products
Products
Information
Eksma Optics
Contacts
- Address: Dvarcioniu st. 2B LT-10233 Vilnius, Lithuania
- Phone: (+370) 5 272 99 00
- Fax: (+370) 5 272 92 99
- E-mail: [email protected]
© 2025 EKSMA Optics, UAB. All rights reserved.
