Optical Positioners (840)
Wide selection of holders for linear and/or angular adjustment of an optical element. Optical positioners includes: large aperture optical mounts, kinematic mirror and beamsplitter mounts, precision and high stability L-Shaped steel optical mounts, precision kinematic optical mount, miniature mirror/beamsplitter mounts, mirror mounts with locking screws, gimbal mount, round optics adapters, adapters for mirrors and beamsplitters at 45 deg, adapters for polarizers at 56 deg., budget kinematic optical mounts, precision optical mounts of side control series T, flipping mirror/beamsplitter mount, prism holders, polarizer holders, high precision rotation polarizer waveplate mounts, kinematic adjustable polarizer holders of side drive, vertical drive optical mounts.
The Kinematic Mirror and Beamsplitter Mounts provide fine and smooth angular alignment of mounted elements. They are designed for stable orientation of mirrors, beamsplitters, prisms and other optical components.
1", 2", 3" Kinematic Mirror / Beamsplitter Mounts are used for precise angular and linear alignment of optical elements. There are two types: for round optical elements and for square optical elements.
The Mirror/Optics Mount provides smooth and precise adjustments with sensitivity of 10 arcsec and can be used in horizontal position as a tilt stage with the Spring Clamp 840-0112 and the Mounting post.
The extremely small mount has small adjustment screws with a hexagonal head or a hexagonal keyhole. These black anodized aluminium mirror mounts are ideal for holding of 25 mm and smaller optics in tight spaces.
This mount is designed so that two intersecting axes of rotation are orthogonal and fixed in space. Such design allows independent adjustment about both axes without translation of the center of the rotated component.
The Round Optics Adapter may be attached to the platform of 840-0102-T mount on any side. Optics rests on the two contact lines – the edges of the cut-off corner – and is firmly held in place by a stainless steel fixing screw.
The cut-off side clears the edge of the optics for working with a beam very closely situated to another beam. A fixing screw of stainless steel clutches optics firmly against the two contact lines formed at the cut-off side.
The Prism and Polarizing Cube Adapter allows to work with two beams situated very closely. A stainless steel fixing screw clutches optics firmly. This adapter may be used with small optics mount 840-0102-T or 840-0110-T mounts.