Long-Travel Motorized Linear Stage 960-0110

Long Travel Motorized Linear Stages 960-0110 series stages are designed to provide high-speed movement. Standard motors allow moving loads up to 40 kg. Load capacity can be increased using more powerful motors. This stage provides moderate resolution and accuracy. 960-0110 stages are supplied equipped with platform, base plates (2 pc) and appropriate amount of inserts.

 

Resolution and speed of 960-0110 series stages can be varied choosing appropriate ball screw pitch. Several standard options are available and should be specified upon ordering. For application requiring travel over 500 mm we suggest using suggest using 960-0115X series stages (X) paired with 960-0110 series stages (Y) to make XY assemblies.

 

For applications requiring vertical Z axis movement, we suggest using stages with brake mounted on motor, to  prevent carrier sliding down when motor current is turned off. Ordering code of Z stages is 960-0110Z.

Delivery

Estimated delivery time: from 5 - 6 days

Travel range
Code Travel range Price Delivery Add to cart
960-0110X-340 340 mm Request Request To cart
960-0110Z-340 340 mm Request Request To cart
960-0110X-540 540 mm Request Request To cart
960-0110Z-540 540 mm Request Request To cart
960-0110X-740 740 mm Request Request To cart
960-0110Z-740 740 mm Request Request To cart
960-0110X-840 840 mm Request Request To cart
960-0110Z-840 840 mm Request Request To cart

Long-Travel Motorized Linear Stages 960-0110 can be ordered with different lead screw pitch 2.5 / 4 / 5 / 10 mm.

Delicious
Travel range* 340...2840 mm                                                                   
Lead screw pitch 2.5/4/5/10 mm
Resolution: 
          in full step** 12.5 µm
          in 1/8 step** 1.57 µm
Max. speed**
on request  we fit alternative motors
40 mm/s
Load capacity:  
Horizontal 40 kg
Vertical 10 kg
Motor connector DB9(M)
Stepper motor  
      960-0110X 5918
      960-0110Z 5918-B
Mechanical end limit switches 2
Switch polarity pushed is open
** Test condition:
  -Lead screw pitch - 2.5 mm
  -Stepper motor: 2 phase bipolar wiring; phase resistance 2.4 â„¦; 200 steps per revolution; step angle - 1.8°; current - 1.5A;
  -Controllers
  -36V.
Eksma Optics is a member of: Linked.in Twitter.com
PayPal.com Paysera
© Optolita UAB 2013. All rights reserved.
Touched by digitouch!