EKSMA Optics uses cookies to give you the best shopping experience. If you continue to use our services, we will assume that you agree to the use of such cookies.
EKSMA Optics uses cookies to give you the best shopping experience. If you continue to use our services, we will assume that you agree to the use of such cookies.
Understand
Optical Positioners
02
Wide selection of holders for linear and/or angular adjustment of an optical element. Optical positioners includes: large aperture optical mounts, kinematic mirror and beamsplitter mounts, precision and high stability L-Shaped steel optical mounts, precision kinematic optical mount, miniature mirror/beamsplitter mounts, mirror mounts with locking screws, gimbal mount, round optics adapters, adapters for mirrors and beamsplitters at 45 deg, adapters for polarizers at 56 deg., budget kinematic optical mounts, precision optical mounts of side control series T, flipping mirror/beamsplitter mount, prism holders, polarizer holders, high precision rotation polarizer waveplate mounts, kinematic adjustable polarizer holders of side drive, vertical drive optical mounts.
The Super fine and stable Kinematic Optical Mounts are used for large and heavy optics. The design of it is very compact and rigid. Its adjustment screw thread pitch is 0.25 mm.
840-0005-05 Precise Adjustable Kinematic Mount is designed for large optics. It is suitable for optics up to 500 mm in diameter and 52 mm in thickness.
This Big Optical Mount is used for large and heavy optics. The mount is designed for a transmission optics. Optics diameter is 115-200 mm, optics thickness - 52 mm.
The Kinematic Mirror and Beamsplitter Mounts provide fine and smooth angular alignment of mounted elements. They are designed for stable orientation of mirrors, beamsplitters, prisms and other optical components.
Highly Stable Precision L-shaped Optical Mounts are designed on the basis of two angular adjustment mounts, and are made of steel with black chemical finishing.
These Precision and High Stability Optic Mounts are universal, durable, and render very stable adjustment. Independent tilt about two horizontal axes - 6° with 3 arcsec sensitivity.
The Universal Mirror Mount/Platform is suited for precise adjustment of standard mirrors which can be directly bound to it. The mount may be used in horizontal position as a tilt table.
The Large Aperture Optical Mount 840-0053-01 has a Ø31.8 mm aperture, while 840-0053-02 on its platform has a Ø51 mm aperture and six M4 mounting holes.
1", 2", 3" Kinematic Mirror / Beamsplitter Mounts are used for precise angular and linear alignment of optical elements. There are two types: for round optical elements and for square optical elements.
1" and 2" optics mounts with L-shaped flat spring. 840-0057 mounts are precise, stable and equipped with hard steel or saphire seats under adjustment screws.
The Mirror/Optics Mount provides smooth and precise adjustments with sensitivity of 10 arcsec and can be used in horizontal position as a tilt stage with the Spring Clamp 840-0112 and the Mounting post.
The extremely small mount has small adjustment screws with a hexagonal head or a hexagonal keyhole. These black anodized aluminium mirror mounts are ideal for holding of 25 mm and smaller optics in tight spaces.
The Miniature Tilt/Rotation Mount, made of black anodized aluminium, allows to rotate and to tilt a component. Adjustment screws have a pitch of 0.25 mm. Each screw can be driven with a 3 mm hex key.
This mount is designed so that two intersecting axes of rotation are orthogonal and fixed in space. Such design allows independent adjustment about both axes without translation of the center of the rotated component.
The Round Optics Adapter may be attached to the platform of 840-0102-T mount on any side. Optics rests on the two contact lines – the edges of the cut-off corner – and is firmly held in place by a stainless steel fixing screw.
The Miniature Clamp is ideal if the mount is used as a tilt platform. It has a fixing screw, and a plastic fastening pad. The Miniature Clamp allows to fasten optical elements up to 1".
The cut-off side clears the edge of the optics for working with a beam very closely situated to another beam. A fixing screw of stainless steel clutches optics firmly against the two contact lines formed at the cut-off side.
The Prism and Polarizing Cube Adapter allows to work with two beams situated very closely. A stainless steel fixing screw clutches optics firmly. This adapter may be used with small optics mount 840-0102-T or 840-0110-T mounts.