Rotation range | 360° |
Encoder resolution | 2000 |
Max. rotation speed | 16 turn/min |
Backlash | 0 μm |
Wobble | 0.5 arcmin |
Eccentricity | 10 μm |
Load capacity Horizontal Vertical |
10 kg 2 kg |
Torque | 1 Nm |
Cable* | 2 m |
Motor | SM |
Power supply PUP120-17
36V; 3.34 A
167 x 65 x 37 mm
640 g
Mini-DIN male 4-pin power connector
960-0140SM Motorized Rotation Stages with SM System
299.21 kB |
The SM system is a complete, compact and user-friendly integrated control system that features a brushless DC servo motor, motion controller, encoder and amplifier.
It is a decentralized drive system. It is a fully integrated motor system that includes a Brushless D.C. Servo-Motor (BLDC), Motion Controller, Drive-Electronics, Position Feedback Encoder and Fully Programmable Points of I/O (Inputs/Outputs). All these components are placed inside one integral frame or housing.
Each decentralized drive system is fully programmable as a stand-alone system or as part of a network fieldbus - Profibus, DeviceNet or RS232, RS485.
The integration of motor, controller and drive reduces complexity in an application and significantly increases reliability. The command set and firmware enables the SM system to perform a wide range of motion controls, arithmetic and conditional logic functions.The unit is a highly capable, stand-alone, complete motion control system that is easy to implement and use.
The SM system has more features than most full-size controls:
- Brushless DC servo motor
- S-232 & RS-485
- Stand alone capability
- Torque to 2000+ oz. in. / 15 NM
- Network up to 100 Servida Motors
- 4kHz PID
- Speeds 0 - 10,000 RPM
- CE marked & UL registered
- Expandable and programmable I/O expandableto 800 inputs and 800 outputs
- On-the-fly parameter changes
- Position Mode
- Velocity Mode
- Torque Mode
- Infinite Ratio Gearing
- Electronic Gearing/ Following Mode
- Step & Direction Mode
- Limit switch inputs
- Closed loop on external encoder
- Single voltage input
- Standard NEMA mount
- 32k user EEPROM
- Software current limit
- Thermal protection
- Easy Windows Software
- Contouring mode from host PC