|Add to cart
|travel range - 50 mm
|travel range - 100 mm
|travel range - 150 mm
|travel range - 200 mm
|base plate for mounting to optical tables
|angle bracket for Z axis assembly
|Lead screw pitch
|Resolution in full step
|Wiring scheme of the motor VSS42
|Design Voltage of the motor VSS42, V
|Phase Current of the motor VSS42, A
|Holding Torque of the motor VSS42, Nm
|Detent Torque of the motor VSS42, mNm
|Phase Resistance of the motor VSS42, Ohm
|Inductance of the motor VSS42, mH
|Steps/Revolution of the motor VSS42
Assemblies of the motor VSS42
To flat surface
|Snap-action limit switch
|two end switches
|Pushed is "closed"
High vacuum compatible Sub-D, male or female, 9 or 15 pin connectors can be ordered separately. The connectors are made of glass filled polymer with a stainless steel outer and suitable for High Vacuum (10-8 mbar) and temperatures up to 110°C.
Specification of HV Sub-D Connectors:
Vacuum: 10-8 mbar
Body material: DEP
Temp. range: -55°C to 110°C
Pin material: Gold plated copper alloy
Connectors of other sizes and vacuum feedthroughs are available on request.
Vacuum Compatible Motorized Stages are equipped with vacuum compatible stepper motor. Stages stack in X-Y configurations directly using M6 screws. Angle Bracket 810-0160V is used to mount stages for vertical translation; it is also used for X-Y-Z configurations. To mount stages on a flat surface you will need 820-0115V base plate.