Motorized Vertical Translation Stage 940-0200
• Pantograph design • 16 ball bearings • Stepping motor drive • Precision lead screw • 95 mm vertical travel • Height: min 89 mm, max 184 mm • Top and bottom plates parallel to 1 mm • Load capacity 8 kg (depending on… Read more →
Listed in
Order
| SKU | Spec | |
|---|---|---|
| 940-0200 |
Out of stock
$1,077
|
Specifications
| Travel range | 95 mm |
| Height / Min. / Max. | 89 mm / 184 mm |
| Lead screw pitch | 1 mm |
| Top and bottom plates parallel to | 1 mm |
| Load capacity | 8 kg (depending on motor and controller) |
| Material | black anodized aluminium |
| Supply voltage | 36 V |
| Motor connector | DB9(M) |
| Motor | 5618 |
| Weight | 4,3 kg |
| Mechanical end limit switches | 2 |
| Switch polarity | pushed is closed |
| Motorized Vertical Translation Stage - DWG file |
Description
- Pantograph design
- 16 ball bearings
- Stepping motor drive
- Precision lead screw
- 95 mm vertical travel
- Height: min 89 mm, max 184 mm
- Top and bottom plates parallel to 1 mm
- Load capacity 8 kg (depending on motor & controller)
- Supply voltage 36V
Motorized Vertical Translation Stage 940-0200 boasts our unique design. Being very compact, it provides smooth and stable adjustment of height. It has a large travel range and supports large loads. While moving the platform stays parallel to the base.
Examples of use: making up for height differences during the set up; automation of technological processes, like laser welding.
A stepper motor type - 5618, 200 steps. Customer can specify other types of motors to install. Load capacity and speed all greatly depend on the motor. We can test and select an appropriate motor for your requirements.
The lead screw acts at a varying angle, so the resolution of the stage varies with position. The platform has an array of M6 holes spaced by 25 mm. The base has six M6 and two Ø6.5 holes. Material: black anodized aluminium.
