SPECIFICATIONS
| Flatness | λ/8 @ 633 nm |
| Parallelism | 20 arcsec |
| Perpendicularity | < 5 arcminn |
| Angle tolerance | < 30 arcmin |
| Aperture tolerance | ± 0.1 mm |
| Surface quality | 10/5 scratch & dig per MIL-O-13830A |
| Clear aperture | 90% of full aperture |
Contact us for more information or non-standard specifications.
PHYSICAL PROPERTIES
| Chemical formula | CsLiB6O10 |
| Transparency range | 180-2750 nm |
| Effective NLO coefficient |
1.01 pm/V @ 532 nm 1.16 pm/V @ 488 nm |
| NLO coefficients |
deff(Ⅰ) = d36sinθmsin(2 φ) deff(Ⅱ) = d36sin(2θm)cos(2 φ) |
| Sellmeier equations, CLBO at 20°C (0.1914＜ λ ＜2.09 μm) |
no2 = 2.2104+0.01018 / (λ2-0.01424）- 0.01258λ2 ne2 = 2.0588+0.00838 / (λ2-0.01363）- 0.00607λ2 |
| Density | 2.461 g/cm3 |
| Mohs hardness | 5.5 |
| Melting point | 1118 K |
| Thermal conductivity | 1.25 W/mK |
| Refractive indices |
ne = 1.4340, no = 1.4838 @ 1064 nm ne = 1.4445, no = 1.4971 @ 532 nm |
| Therm-optic coefficients |
dno/dT = -1.9 × 10-6/°C dne/dT = -0.5 × 10-6/°C |
Applications
| Wavelength | Phase Matching Angle | Deff | Angle Tolerence | Walk-off Angle |
| 532+532=266 nm | 61.7° | 0.84 pm/V | 0.49 mrad - cm | 1.83° |
| EKSMA Optics CLBO Crystals
56.79 kB |
Cesium Lithium Borate CsLiB6O10 (CLBO) is a nonlinear crystal perfect for harmonic generation in the UV range with a transmission cut-off edge reaching 180 nm. Compared with common BBO nonlinear optical material, CLBO crystals feature larger spectral and temperature acceptance, better angle tolerance, and a smaller walk-off angle. CLBO is a good choice for frequency doubling (SHG), and it is suitable for frequency quadrupling (FHG) of high-power Nd:YAG laser systems. CLBO shows no saturation for high-power generation due to the absence of two-photon absorption typically observed in BBO and KDP crystals.
Some of standard applications:
- Harmonic generation (up to fifth) of Nd-doped lasers
- Frequency doubling and tripling of Alexandrite, Ti:Sapphire lasers
CLBO is a highly hygroscopic NLO crystal material. Therefore, standard CLBO crystals are supplied sealed in 1 inch (ø25.4 mm) housings with anti-reflection coated UV FS protective windows. Unmounted CLBO crystals are available upon custom request.
To ensure safe use of CLBO crystals it is important to consider:
- Temperature: the temperature should be kept stable. The recommended temperature range is 20 - 60 °C. We recommend using HP200 oven with HPC thermocontroller.
- Humidity: high humidity (>30%) can affect the performance of CLBO crystals. It is important to store them in a dry environment.
Related products
- Address: Dvarcioniu st. 2B LT-10233 Vilnius, Lithuania
- Phone: (+370) 5 272 99 00
- Fax: (+370) 5 272 92 99
- E-mail: [email protected]
