|
Material |
UV FS |
|
Surface quality |
20-10 scratch & dig (MIL-PRF-13830B) |
|
Transmitted wavefront distortion |
λ/10 @ 633 nm |
|
Parallelism |
< 30 arcsec |
|
Clear aperture |
> 85% of size elliptical at 56° |
|
Angle of incidence |
56° |
|
Angle of Incidence Tolerance |
±2° |
|
Diameter tolerance |
+0.0 / -0.12 mm |
|
Thickness tolerance |
±0.2 mm |
|
Laser damage threshold |
>100 mJ/cm2, 50 fsec pulse, 800 nm typical, 50 Hz |
|
Extinction ratio Tp/Ts |
>200:1 (for standard series) >1000:1 (for HE series) |
| EKSMA Optics Femtoline Thin Film Laser Polarizers
142.41 kB |
- Rs/Tp>99.5/95.0% for Standard Thin Film Laser Polarizers
- Rs/Tp>99.5/99.0% for High Transmission Thin Film Laser Polarizers
- Tp>98%, Ts<0.1% for Thin Film Polarizers with High Extinction Ratio
- >200:1 exctinction ratio for standard and high transmission polarizers
- >1000:1 exctinction ratio for polarizers with high extinction ratio (HE series)
Thin Film Polarizers seperate s- and p-polarization components. Thin Film Polarizers can be used as an alternative to Glan laser polarizing prisms or cube polarizing beamsplitters due to the high damage threshold reaching 100 mJ/cm2, at 800 nm, 50 fsec.
Thin Film Polarizers are used in high energy lasers. They can be used for Yb:KGW/KYW or Ti:Sapphire laser fundamental wavelength and its harmonics or intracavity Q-switch hold-off polarizers. The most efficient way to use thin film laser polarizers is at Brewster angle - 56° ±2 ° with minimal losses. Typical horizontal polarization ratio Tp/Ts is 200:1. Thin Film Laser Polarizers with Tp>99% are available on customer request.
Related products
- Address: Dvarcioniu st. 2B LT-10233 Vilnius, Lithuania
- Phone: (+370) 5 272 99 00
- Fax: (+370) 5 272 92 99
- E-mail: [email protected]
.jpg)
.jpg)