- Femtoline Components
- Nd:YAG Laser Line Components
- Optical Components
- Optical Systems
- DPSS Lasers and Laser Accessories
- Opto-Mechanical Components
- Pockels Cells and Drivers
- Nonlinear and Laser Crystals
Table Supports 765, 766
- Convenient sizes
- Optimal height
- Multipurpose in use
- Handy assembling
Optical Table Supports are primarily designed for support of the Honeycomb Tabletops 720-740. Table Supports are produced from steel tubes of 100 mm square section, in decorative black coating, and contain two "Π" type supports, bound by a cross-beam.
Optical Table Supports ideally suit other types of optical plates and other equipment, e.g. Laser Shelves, as well. This is possible because the plates are not fastened – they are just laid on top of the supports.
On request we produce table supports of any size, design, and of greater sturdiness.
For heavy tabletops longer than 3500 mm we provide reinforced table support structure by default. Extra cross-bars are added to three sides of the table support frame for increased stability and reliability. Standard length - 2200 mm between support leg centers.
Estimated delivery time: Request
AR -Rubber Leveling Element
AS - Solid Leveling Element
AP - Passive Air Leveling Vibration Isolator
|Natural frequency||3-5 Hz|
|Natural frequency pressure-relieved approx.||8 Hz|
|Load range per 4 isolators|
|AP-200||30 - 260 kg (max pressure 5 bar)|
|AP-500||140 - 720 kg (max pressure 5 bar)|
|AP-1000||220 - 1120 kg (max pressure 6 bar)|
The example of the code is: 765-0914-2A-77-900-C.
It consists of:
765/766 – choose type of optical table supports
0914 – width and length of honeycomb table top
A/2A – one/two armrests
77- overall height of a working surface 770 mm
900/1900 – the length of the laser shelves 792
C - caster
AR Rubber Leveling Element
Rubber leveling element (AR) ensures sufficient vibration isolation.
AS Solid Leveling Element
Solid Leveling element (AS) is used, when no damping is needed.
AP Passive Air Leveling Vibration Isolator
Passive Air Leveling Vibration Isolator 1TS-AP is a low height, low stiffness air spring isolator mount suitable for both passive and dynamic applications where a support natural frequency as low as 3-5 Hz is required.
Typical passive applications include the protection of vibration sensitive equipment such as co-ordinate measuring machines, metrology inspection devices, isolation tables and electron microscopes.
The 1TS-AP Isolator elastomer body is made of CR grade with high elasticity oil resistant and non-aging. Pressure and bottom plates are made of galvanized steel. Inflation is either through the 'moulded in' standard tyre valve or by connection to a permanent air supply.