Your cart
0
There are no items in your cart.
Add items to your cart and request an official quote or order online
Your cart
0
Products categories
Login/Register
There are no items in your cart.
Add items to your cart and request an official quote or order online

Optical Positioners (840)

02

Wide selection of holders for linear and/or angular adjustment of an optical element. Optical positioners includes: large aperture optical mounts, kinematic mirror and beamsplitter mounts, precision and high stability L-Shaped steel optical mounts, precision kinematic optical mount, miniature mirror/beamsplitter mounts, mirror mounts with locking screws, gimbal mount, round optics adapters, adapters for mirrors and beamsplitters at 45 deg, adapters for polarizers at 56 deg., budget kinematic optical mounts, precision optical mounts of side control series T, flipping mirror/beamsplitter mount, prism holders, polarizer holders, high precision rotation polarizer waveplate mounts, kinematic adjustable polarizer holders of side drive, vertical drive optical mounts. 

 

 

Small Optical Mount of Side Drive 840-0102-T
The Small Optical Mount of Side Drive is designed to hold optics in schemes of high density. Adapters are available for round and rectangular lenses, mirrors and beamsplitters or polarizing cubes.
from 9 $
delivery Estimated delivery time: 5 - 6 days
Mirror Mounts of Side Regulation 840-0110-T, 840-0110-TE
The Mirror Mount of Side Regulation enables to increase greatly the thickness of optical elements as it has a convenient access to the regulation handles.
from 11 $
delivery Estimated delivery time: 5 - 6 days
Round Optics Adapters 840-0110-A1
The Round Optics Adapters can be attached to the platform of 840-0110-T mount on any side. Optics is firmly held by a stainless steel fixing screw and it rests against two contact lines - the edges of the cut-off corner.
from 37 $
delivery Estimated delivery time: 5 - 6 days
Miniature Clamp 840-0110-A2
Ideal if a mount is used as a tilt platform. Plastic clutching pad clamps elements up to Ø40 mm (1.5'').
18 $
delivery Estimated delivery time: 5 - 6 days
Mirror Adapter 840-0110-A3
The cut-off side clears the edge of the optics for working with a beam very closely situated to another beam. The adapter is suitable for optical elements up to Ø50 mm (2 inch).
21 $
delivery Estimated delivery time: 5 - 6 days
Adapter 840-0110-A5
The Platform Adapter allows to turn optics to a convenient position.
15 $
delivery Estimated delivery time: 5 - 6 days
Spring Clamps 840-0111
The Spring Clamps are used to clamp components directly to the surfaces of optical tables or translation stages. These Clamps are used to hold prismatic elements like glass blocks, prisms, cells.
from 13 $
delivery Estimated delivery time: 5 - 6 days
Adapter for Mirror at 45 deg 840-0115
This Adapter is suitable for dichroic mirrors operating at AOI 45 deg. It easily accommodates any optical mount designed for 1'' optics or can be attached to any mount using baseplate.
30 $
delivery Estimated delivery time: 4 - 5 days
Adapter for Beamsplitter at 45 deg 840-0116
This Adapter is suitable for dichroic mirrors and beamsplitters operating at AOI 45 deg. It easily accommodates any optical mount designed for 1'' optics or can be attached to any mount using baseplate.
from 30 $
delivery Estimated delivery time: 4 - 5 days
Adapter for Round Polarizer at 56 deg 840-0117
Optics is firmly held by a plastic securing screw. The Adapter for Round Polarizer easily accomodates any optical mount designed for 1'' optics or can be attached to any mount using a baseplate.
from 33 $
delivery Estimated delivery time: 4 - 5 days
Adapter for Rectangular Polarizer at 56 deg 840-0118
Optics is firmly held by a plastic securing screw. The Adapter for Rectangular Polarizer easily accommodates any optical mount designed for 1'' optics or can be attached to any mount using a baseplate.
from 34 $
delivery Estimated delivery time: 4 - 5 days
Prism/Optics Mount 840-1120-B
The Prism Mount provides basic mounting for prisms, beamsplitter, cubes and etc. These Mounts are equipped with fine pitch M6x0.25 mm adjustment screws, which rest upon hardened steel seats to provide reliable and repeatable adjustment.
from 65 $
delivery Estimated delivery time: 5 - 6 days
Universal Platform Mount 840-2120-B
The Universal Platform Mount is designed for precise adjustments of various optical components which can be directly bound to it. The mount can be also used horizontally for tip/tilt adjustment.
from 55 $
delivery Estimated delivery time: 5 - 6 days
Beamsplitter/Mirror Mounts 840-3120-B
For Ø25.4 mm (1 inch) optics, reset-flange inside the central aperture stops the optics, nylon-tipped fixing screw secures the optics, M6x0.25 adjustment screws provide precise kinematic control.
from 53 $
delivery Estimated delivery time: 5 - 6 days
Mirror Optical Mount 840-4120-B
For Ø25.4 mm (1 inch) optics, 2 contact points for optimum stability, one edge of the optics stays clear, helpful in schemes where beams are very closely situated to each other.
from 60 $
delivery Estimated delivery time: 5 - 6 days
Objective Mount 840-0120-T
This Objective Mount of Side Control has W 0.8‑36 mm aperture and is used for precise adjustment of standard microscope objective lenses and ensures low-cost positioning of a focus point. Also it can be used in the fiber optics.
from 66 $
delivery Estimated delivery time: 4 - 5 days
Beamsplitter/Optics Mount 840-0130-T
The Beamsplitter/Optics Mount is designed to adjust beamsplitters measuring Ø25 mm. The Fixing screw with a plastic tip clutches a beam­splitter against stainless steel rests.
76 $
delivery Estimated delivery time: 5 - 6 days
Universal Mirror Mount/Platform 840-0140-T
The Universal Mirror Mount/Platform is suited for precise adjustment of standard mirrors which can be directly bound to it. The Mount may also be used in horizontal position as a tilt table.
83 $
delivery Estimated delivery time: 5 - 6 days
Large Aperture Optical Mount 840-0150-T
The Large Aperture Optical Mount on its platform has a Ø31.8 aperture. It is designed for precise orthogonal adjustment of mirrors.
95 $
delivery Estimated delivery time: 5 - 6 days
Flipping Mirror/Beamsplitter Mount 840-0155
The Flipping Mount is used to place optics in and out of the optical scheme. Precise alignment of various optical elements to desired angles is done by 2 adjustment screws.
from 153 $
delivery Estimated delivery time: 5 - 6 days
Flipping Mirror/Beamsplitter Mount 840-0155-04
Flip optics in and out of the optical scheme, tilt/tip range 8 deg., sensitivity 3 arcsec, kinematic design, for Ø 50.8 mm optics (2 inch), maximum optics thickness 7 mm.
from 177 $
delivery Estimated delivery time: 5 - 6 days
Miniature Flipping Mirror/Beamsplitter Mounts 840-0155-06, 840-0155-07, 840-0155-08, 840-0155-09
Flip optics in and out of the optical scheme, tilt/tip range 9 deg., sensitivity 8 arcsec, repeatability 20 µrad, for Ø12.7 and Ø25.4 mm (0.5” and 1”) optics.
from 119 $
delivery Estimated delivery time: 5 - 6 days
Prism Holders 840-0160, 840-0170
The Prism Holders provide easy and safe mounting of prism type optics. Precision kinematic adjustment around two orthogonal axes ranges within ±6°.
from 76 $
delivery Estimated delivery time: 4 - 5 days
Polarizer Holders 840-0180-A, 840-0180-B
The Polarizer Holders are ideal for positioning rotation sensitive optics such as polarizers or waveplates. Holders are offered for optics 1", 2" or 3'' in diameter.
from 83 $
delivery Estimated delivery time: 5 - 6 days