Large Motorized Rotation Stages 960-0130

  • Hardened steel with aluminium body
  • Large diameter ball bearings
  • Worm Gear Ratio is 1:120
  • Hall-effect reference limit switch
  • Stepper motor or DC motor with encoder
  • Motor can be optionally equipped with reduction gear
  • 1.8 m long cable included
  • Very high load capacity
  • Vacuum version 960-0130V available on request
  • Encoders or Revolution sensors are available on request. More information
Delivery

Estimated delivery time: from 5 - 6 days

Weight
Description
Code Description Weight Price Delivery Add to cart
960-0130-01 Rotation Stage with stepper motor 4247 (1.2A, 200 steps) 6.6 kg 3600 $ 5 - 6 days To cart
960-0130-02 Rotation Stage with stepper motor 5918 (2,1A, 200 steps) 5.7 kg Request Request To cart
960-0130V Rotation Stage with stepper vacuum motor VSS43 5.7 kg Request Request To cart
Delicious
Model 960-0130-01 960-0130-02 960-0130V
Rotation range 360° continuous
Resolution
    in full step*
    in 1/8 step*

54 arcsec
6.75 arcsec
Repeatability (bidirectional) 72 arcsec
Backlash 40 arcsec. max.
Maximum speed* 10 turn/min 6 turn/min 4 turn/min
Wobble 40 μRa
Cable 1.6 m length 2 m length
Motor Connector DB9(M) (wiring diagram) HDB15(M) (wiring diagram)
Stepper motor 4247 5918 VSS43* *
Load capacity
    horizontal
    vertical

60 kg
25 kg

40 kg
20 kg
Weight 6.6 kg 5.7 kg
Reference Hall switch 1, pushed is "closed"

* Test conditions: 980-0030 controllers; power supply - 36 V

* * Specifications of stepper motor VSS43: wiring scheme bipolar; design voltage    42 V; phase current  1.2 A; holding torque   0.235 Nm; detent torque 7 mNm; phase resistance 2.6 Ohm; inductance 5.2 mH; steps/revolution 200 (1.8°).

Eksma Optics is a member of: Linked.in Twitter.com
PayPal.com Paysera
© Optolita UAB 2013. All rights reserved.
Touched by digitouch!